To displace the two prong electric receptacle socket, turn the power off for this circuit in the circuit breaker panel. Work with a voltage tester to verify that the ability is down and check that is double each step of the process through the entire procedure.
You need to just take the receptacle apart by eliminating the wall dish first. Unscrew the middle screw (Or upper and screws that are lower counter-clockwise. Pry away the wall dish through the receptacle. The wall surface dish might be held on the wall surface and/or the receptacle by many people coats of paint. Make use of razor knife to get across the exterior sides for the wall dish. Additionally score over the external face associated with the receptacle. In the event that wall surface plate will not loosen through the knife, take to getting a little flat putty blade behind it. In some cases you could simply have to break off the beaten track dish, however the face associated with receptacle can come down also. Repeat this aided by the charged energy down.
Some newer design wall surface dishes have actually the screws concealed. You need to pry away the leading for the wall surface dish using a little screwdriver that is flat. Pry carefully and evenly from all corners.
Take away the two screws securing the receptacle towards the wall surface field and carefully pull the receptacle away from the wall surface. In the event that screws break down, you are in a position to grab these with a set of Vise-Grip Pliers and gradually turn them down. If it fails you may need to drill out of the old screw and touch the opening and put in a screw that is new. The standard receptacle screw thread is 6/32. It really is # 6 device screw with 32 threads per inches. The screw mind is generally an appartment mind or perhaps a low profile round head. If necessary you are able to re-tap the opening to 8/32 and make use of an 8/32 head machine screw that is flat.